Precautions for operation and operation of automatic screen printing machine

The first thing we should pay attention to is not to let too much water and oil into the air pressure system, so as to effectively avoid cylinder failure and extend the service life of the cylinder. The second is to ensure that the compressed air is dry and clean. A good way is to add a freeze dryer to the automatic screen printing machine.

The next part is the combination of three points. To ensure that the use pressure is within 5-7kg / cm, it is necessary to check whether the oil quantity of converter oil cup is sufficient every day. If the pressure relief valve is not used for a long time, it should be pushed to the rear end. In the use of air conditioning, special oil for air conditioning group should also be used.

In order to improve the printing speed and automation of screen printing equipment, it is also necessary to ensure good operation performance. Generally, the printing machine covers a large area, and several sets of control panels shall be set to ensure that the operators can operate in each main working position. Each operation vertical plate shall conform to people's action habits, the working position shall be easy to observe, the adjustment position shall be intuitive and easy to contact, etc.

In order to ensure the safety of operators and equipment, the automatic screen printing machine is equipped with not only safety protection device, but also safety protection device. Once the machine breaks down, it can automatically shut down.

It is required that the automatic screen printing machine equipment can maintain its original accuracy after long-term use, that is, the machine has a long service life, which is of great economic significance to the country and enterprises. To achieve this, parts materials and heat treatment process should be selected reasonably to ensure the wear resistance of parts; in order to improve the motion accuracy of the transmission system, each fitting surface should have reasonable shape accuracy of several bodies, good fitting clearance and lubrication device, etc.